PostHugger™ Ultimate 1000#Cap. Workbench Kit | 8 Steel Corners-4 Wheels For 4x4s
Build your own rugged and heavy-duty ULTIMATE 1000 LB. CAPACITY ROLL AROUND SHOP/GARAGE WORKBENCH TABLE with our USA made 1/8" thick steel outside corner brackets and our post-to-wheel end brackets with welded on, locking/rolling wheel! Each wheel castor/caster is rated at 250 pounds for an impressive half ton of rolling around ability for the set of four! Designed for dimensional 4x4 (3.5”x3.5”) wood post legs. Each Kit includes the following: Eight (8) Heavy-Duty 1/8" Thick Steel Outside Corner Brackets Four (4) 1/8" Thick Steel Wheel Brackets with Welded-On Locking/Rolling Wheels That's Four (4) Corners for the top; Four (4) Corners for a lower level support/shelf; and Four (4) Locking Swivel Castors! Build tip: When designing your build, be sure to keep the bottom shelf brackets at least 4" up from the bottom of the corner posts so that your Bolt-On Castor Brackets can be attached to the legs. These wheels will not shear off like other castors when you roll around your heavy cart or hit a rock. Nope! They are 1/8” thick steel frames with welded-on locking castors! We use all locking castors so it is easy to find two to step on & lock. Because they are step-lock, when you need to unlock, just lift lever with top of shoe. A lot easier than the kind with a mid-wheel pivot lock where you have to use your hand. Made for 4x4 POSTS, there are two 1/2" holes on each of the top ears for fastening to your 4x4 leg. (The holes for the tables legs are offset so that if you want to thru bolt, you don't have to worry about hitting any of the other installed bolts!) All our brackets can be installed using any 1/2" wood lag screws or 1/2" thru bolts. If you use lag screws, we recommend 1/2" x 2" length, or 3” length. Home Depot and Lowe’s sell them in packs of 25 for a fair price. If you choose to thru bolt, go at least 1/2" x 4.5". HARDWARE NOT INCLUDED: Bolts/lag screws are not included with our brackets. Note: Actual color of polyurethane wheel may vary from bright red depicted to a darker red, depending on our supplier. However, all swivel wheel brackets sets will contain the same lot color. We also make Corner Brackets, Flat T brackets for joining other parts of your design, and Bent L’s for use as inside corners. And we make a Legless T™ (no vertical leg), and a Flat L (which is Flat like the T, but without the extra short leg). If you want to mix and match, just let us know how many of each you would like and we will set you up a custom listing.Made in the USA: All our PostHugger™ Brackets & metal artwork products are Made in America with American-Made Steel! Any Questions? Feel free to reach out! Thanks for shopping with us! © 2024 Thermo-Flex Technologies, Inc. - All Designs, Photos, and Text are the Intellectual Property of Shop Owner and are not to be copied without express written permission.
Specifications
| Return Shipping Will Be Paid By | Buyer |
| All Returns Accepted | Returns Accepted |
| Item Must Be Returned Within | 30 Days |
| Brand | RiverDriveDesigns |
| Custom Bundle | Yes |
| Model | PostHugger™ |
| MPN | N/A |
| Country/Region Of Manufacture | United States |
Build your own rugged and heavy-duty ULTIMATE 1000 LB. CAPACITY ROLL AROUND SHOP/GARAGE WORKBENCH TABLE with our USA made 1/8″ thick steel outside corner brackets and our post-to-wheel end brackets with welded on, locking/rolling wheel! Each wheel castor/caster is rated at 250 pounds for an impressive half ton of rolling around ability for the set of four! Designed for dimensional 4×4 (3.5”x3.5”) wood post legs. Each Kit includes the following: Eight (8) Heavy-Duty 1/8″ Thick Steel Outside Corner Brackets Four (4) 1/8″ Thick Steel Wheel Brackets with Welded-On Locking/Rolling Wheels That’s Four (4) Corners for the top; Four (4) Corners for a lower level support/shelf; and Four (4) Locking Swivel Castors! Build tip: When designing your build, be sure to keep the bottom shelf brackets at least 4″ up from the bottom of the corner posts so that your Bolt-On Castor Brackets can be attached to the legs. These wheels will not shear off like other castors when you roll around your heavy cart or hit a rock. Nope! They are 1/8” thick steel frames with welded-on locking castors! We use all locking castors so it is easy to find two to step on & lock. Because they are step-lock, when you need to unlock, just lift lever with top of shoe. A lot easier than the kind with a mid-wheel pivot lock where you have to use your hand. Made for 4×4 POSTS, there are two 1/2″ holes on each of the top ears for fastening to your 4×4 leg. (The holes for the tables legs are offset so that if you want to thru bolt, you don’t have to worry about hitting any of the other installed bolts!) All our brackets can be installed using any 1/2″ wood lag screws or 1/2″ thru bolts. If you use lag screws, we recommend 1/2″ x 2″ length, or 3” length. Home Depot and Lowe’s sell them in packs of 25 for a fair price. If you choose to thru bolt, go at least 1/2″ x 4.5″. HARDWARE NOT INCLUDED: Bolts/lag screws are not included with our brackets. Note: Actual color of polyurethane wheel may vary from bright red depicted to a darker red, depending on our supplier. However, all swivel wheel brackets sets will contain the same lot color. We also make Corner Brackets, Flat T brackets for joining other parts of your design, and Bent L’s for use as inside corners. And we make a Legless T™ (no vertical leg), and a Flat L (which is Flat like the T, but without the extra short leg). If you want to mix and match, just let us know how many of each you would like and we will set you up a custom listing.Made in the USA: All our PostHugger™ Brackets & metal artwork products are Made in America with American-Made Steel! Any Questions? Feel free to reach out! Thanks for shopping with us! © 2024 Thermo-Flex Technologies, Inc. – All Designs, Photos, and Text are the Intellectual Property of Shop Owner and are not to be copied without express written permission.
