REAMER WOOD TEK SCREWS: Wood to Metal Fastening (Reamer Wings) Torx/Star Drive
Reamer Tek Torx/Star Head Self-Drilling Wood to Metal ScrewsReference Installation Instructions Before Installing - NOT For Welded Seams or Tempered Metal Reamer Tek Screws are for Applications where Wood is Being Fastened to Mild Steel or Aluminum Self-Drilling Wings Bore Through Wood and Then Break Off Once They Contact the Metal High Quality Treated Steel, Deep, Wide and Sharp Threads Provide Maximum Holding PowerThese Bronze Coated Reamer Tek Screws are ACQ / Treated Lumber Compatible Corrosion Resistant, Screws Have Passed 1200 Hours of Salt Spray Testing without Coating Failures Countersinking Head Provides a Neat and Clean Finished Look, Holds Material in Place Securely Torx/Star Drive Delivers Twice the Torque of Phillips or Square Drive Screws With Less Slippage Deep Torx/Star Drive Head on These Tek Screws Reduce "Cam-out" When Installing Screws Great Tek Screw for Trailer Decks, Truck Beds, Docks, Horse and Utility Trailers and ATV Trailers Reamer Tek Wood To Metal Screw Capabilities 10 x 1-5/8" Maximum Wood depth ~7/8" - Maximum Metal Thickness Screw Can Bore ~1/8" - Use T-25 Torx/Star BitDimensions: Head Width .38" - Total Length 1-5/8" - Shank Diameter .19" - Torx /Star Bit Not included 12 x 2"Maximum Wood depth ~13/16" - Maximum Metal Thickness Screw Can Bore ~3/16" - Use T-25 Torx/Star BitDimensions: Head Width .42" - Total Length 2" - Shank Diameter .21" - Torx /Star Bit Not included 12 x 2-1/2"Maximum Wood depth ~1-1/8" - Maximum Metal Thickness Screw Can Bore ~3/16" - Use T-25 Torx/Star BitDimensions: Head Width .42" - Total Length 2-1/2" - Shank Diameter .21" - Torx /Star Bit Not included 14 x 2-3/4"Maximum Wood depth ~1-1/2" - Maximum Metal Thickness Screw Can Bore ~1/4" - Use T-30 Torx/Star BitDimensions: Head Width .461" - Total Length 2-3/4" - Shank Diameter .24" - Torx /Star Bit Not included 14 x 3-1/4"Maximum Wood depth ~2" - Maximum Metal Thickness Screw Can Bore ~1/4" - Use T-30 Torx/Star BitDimensions: Head Width .461" - Total Length 3-1/4" - Shank Diameter .24" - Torx /Star Bit Not included 14 x 4"Maximum Wood depth ~2-7/8" - Maximum Metal Thickness Screw Can Bore ~1/4" - Use T-30 Torx/Star BitDimensions: Head Width .484" - Total Length 4" - Shank Diameter .24" - Torx /Star Bit Not included Installation Instructions: Use Standard Impact Driver to install. Install screws at Medium speed (2,000 RPM) Faster speed may damage drill tip. Pre-Drilling During Installation is Normally Not Necessary, However You May need to Pre-Drill if using Tempered Steel or Installing into a Welded Seam. Jake Sales (a division of Totoly Jake Inc) has been providing high quality products and service from our Montana based business since 2009. We are a family owned business who strive to always go the extra mile serving our customers (over 200,000 since 2014), and we have the feedback scores to prove it. Since our founding, we have delivered over 30 million screws and fasteners to customers and businesses all across North America. Our high-quality products, speedy shipping times, and courteous service have helped us establish ourselves as the business of choice for our customers. Many of whom run businesses that depend on our products. All of our products are engineered to our high standards and are designed for residential, commercial and industrial usage. We maintain high inventory levels with tens of thousands of items in-stock, able to ship out immediately from our Kalispell MT warehouse. Your business is important to us. Order today from Jake Sales with confidence. Thank you for viewing our listing!
Specifications
| Return Shipping Will Be Paid By | Seller |
| All Returns Accepted | Returns Accepted |
| Item Must Be Returned Within | 30 Days |
| Refund Will Be Given As | Money Back |
| Shape | Does Not Apply |
| Model | Does Not Apply |
| Grip Range | Does Not Apply |
| Head Style | Flat Head |
| Thread Size | Does Not Apply |
| Drive Style | Torx |
| Material | Steel |
| Screw Size | Does Not Apply |
| Holes Per Leaf | Does Not Apply |
| California Prop 65 Warning | Does Not Apply |
| Rail Height | Does Not Apply |
| Mandrel Material | Does Not Apply |
| Grade | Does Not Apply |
| Type | Fasteners |
| System Of Measurement | Inch |
| Item Thickness | Does Not Apply |
| Wire Diameter | Does Not Apply |
| MPN | Does Not Apply |
| Item Length | Does Not Apply |
| Gauge | Does Not Apply |
| Brand | Jake Sales |
| Item Diameter (Interior) | Does Not Apply |
| Item Diameter | Does Not Apply |
| End Type | Does Not Apply |
Reamer Tek Torx/Star Head Self-Drilling Wood to Metal ScrewsReference Installation Instructions Before Installing – NOT For Welded Seams or Tempered Metal Reamer Tek Screws are for Applications where Wood is Being Fastened to Mild Steel or Aluminum Self-Drilling Wings Bore Through Wood and Then Break Off Once They Contact the Metal High Quality Treated Steel, Deep, Wide and Sharp Threads Provide Maximum Holding PowerThese Bronze Coated Reamer Tek Screws are ACQ / Treated Lumber Compatible Corrosion Resistant, Screws Have Passed 1200 Hours of Salt Spray Testing without Coating Failures Countersinking Head Provides a Neat and Clean Finished Look, Holds Material in Place Securely Torx/Star Drive Delivers Twice the Torque of Phillips or Square Drive Screws With Less Slippage Deep Torx/Star Drive Head on These Tek Screws Reduce “Cam-out” When Installing Screws Great Tek Screw for Trailer Decks, Truck Beds, Docks, Horse and Utility Trailers and ATV Trailers Reamer Tek Wood To Metal Screw Capabilities 10 x 1-5/8″ Maximum Wood depth ~7/8″ – Maximum Metal Thickness Screw Can Bore ~1/8″ – Use T-25 Torx/Star BitDimensions: Head Width .38″ – Total Length 1-5/8″ – Shank Diameter .19″ – Torx /Star Bit Not included 12 x 2″Maximum Wood depth ~13/16″ – Maximum Metal Thickness Screw Can Bore ~3/16″ – Use T-25 Torx/Star BitDimensions: Head Width .42″ – Total Length 2″ – Shank Diameter .21″ – Torx /Star Bit Not included 12 x 2-1/2″Maximum Wood depth ~1-1/8″ – Maximum Metal Thickness Screw Can Bore ~3/16″ – Use T-25 Torx/Star BitDimensions: Head Width .42″ – Total Length 2-1/2″ – Shank Diameter .21″ – Torx /Star Bit Not included 14 x 2-3/4″Maximum Wood depth ~1-1/2″ – Maximum Metal Thickness Screw Can Bore ~1/4″ – Use T-30 Torx/Star BitDimensions: Head Width .461″ – Total Length 2-3/4″ – Shank Diameter .24″ – Torx /Star Bit Not included 14 x 3-1/4″Maximum Wood depth ~2″ – Maximum Metal Thickness Screw Can Bore ~1/4″ – Use T-30 Torx/Star BitDimensions: Head Width .461″ – Total Length 3-1/4″ – Shank Diameter .24″ – Torx /Star Bit Not included 14 x 4″Maximum Wood depth ~2-7/8″ – Maximum Metal Thickness Screw Can Bore ~1/4″ – Use T-30 Torx/Star BitDimensions: Head Width .484″ – Total Length 4″ – Shank Diameter .24″ – Torx /Star Bit Not included Installation Instructions: Use Standard Impact Driver to install. Install screws at Medium speed (2,000 RPM) Faster speed may damage drill tip. Pre-Drilling During Installation is Normally Not Necessary, However You May need to Pre-Drill if using Tempered Steel or Installing into a Welded Seam. Jake Sales (a division of Totoly Jake Inc) has been providing high quality products and service from our Montana based business since 2009. We are a family owned business who strive to always go the extra mile serving our customers (over 200,000 since 2014), and we have the feedback scores to prove it. Since our founding, we have delivered over 30 million screws and fasteners to customers and businesses all across North America. Our high-quality products, speedy shipping times, and courteous service have helped us establish ourselves as the business of choice for our customers. Many of whom run businesses that depend on our products. All of our products are engineered to our high standards and are designed for residential, commercial and industrial usage. We maintain high inventory levels with tens of thousands of items in-stock, able to ship out immediately from our Kalispell MT warehouse. Your business is important to us. Order today from Jake Sales with confidence. Thank you for viewing our listing!
