Sashco Symphony Interior Clear Coat
Why Symphony?Wood glows: Highlights wood’s natural beauty by enhancing the unique grain patterns. Every-day life approved: Highly elastic for superior longevity. Resists scuffs and hardy enough to withstand every day rigors. Hassle-free cleaning: A damp rag or microfiber cloth keeps logs looking bright and inviting year after year. Spills wipe clean & won’t discolor the wood. Easy to use: Easy to apply, then simply clean-up with water. No harsh chemicals required. Unique look for your unique home: Use alone for the natural wood look, or over top of Sashco’s Capture or Transformation Stain Siding & Trim to create personal color combinations. (Not recommended for use on floors or exteriors.)Coverage 1st coat: 200-300 sq. ft. per gallon 2nd coat: 400-500 sq. ft. per gallon (As with all stains and clear coats, coverage will vary depending upon roughness and porosity of the wood.) Fundamental Application Guidelines 1. Proper substrate preparation and application are imperative for product longevity. Read this entire Info Sheet before applying any product. 2. You should always test any coatings on your specific logs before applying to an entire wall. 3. Apply only to interior walls where the roof is in place, the product is at room temperature, there are no cold drafts and the wood surfaces are between 50˚F (10˚C) and 90˚F (32˚C). 4. Tannin staining should be dealt with before applying any interior clear coatings to bare logs. Refer to the section titled “Tannin Staining” for further information on this important topic. If you’ve applied a pigmented coat of stain, tannin staining is usually not an issue. 5. The moisture content of interior wood should be low enough to resist microbial growth before applying any coatings, at least 19% or less. Use a moisture meter to make sure this is a fact. If the wood’s moisture content is higher, wait until it lowers to 15% or less, or add a biocide (such as Stay Clean I/E) to your coating before application. Track Page Views With Auctiva's FREE Counter
Specifications
| Return Shipping Will Be Paid By | Buyer |
| All Returns Accepted | Returns Accepted |
| Item Must Be Returned Within | 30 Days |
| Refund Will Be Given As | Money Back |
| Country/Region Of Manufacture | United States |
| Style | Interior Clear Coat |
| MPN | 77414 |
| Brand | Sashco |
Why Symphony?Wood glows: Highlights wood’s natural beauty by enhancing the unique grain patterns. Every-day life approved: Highly elastic for superior longevity. Resists scuffs and hardy enough to withstand every day rigors. Hassle-free cleaning: A damp rag or microfiber cloth keeps logs looking bright and inviting year after year. Spills wipe clean & won’t discolor the wood. Easy to use: Easy to apply, then simply clean-up with water. No harsh chemicals required. Unique look for your unique home: Use alone for the natural wood look, or over top of Sashco’s Capture or Transformation Stain Siding & Trim to create personal color combinations. (Not recommended for use on floors or exteriors.)Coverage 1st coat: 200-300 sq. ft. per gallon 2nd coat: 400-500 sq. ft. per gallon (As with all stains and clear coats, coverage will vary depending upon roughness and porosity of the wood.) Fundamental Application Guidelines 1. Proper substrate preparation and application are imperative for product longevity. Read this entire Info Sheet before applying any product. 2. You should always test any coatings on your specific logs before applying to an entire wall. 3. Apply only to interior walls where the roof is in place, the product is at room temperature, there are no cold drafts and the wood surfaces are between 50ËšF (10ËšC) and 90ËšF (32ËšC). 4. Tannin staining should be dealt with before applying any interior clear coatings to bare logs. Refer to the section titled “Tannin Staining” for further information on this important topic. If you’ve applied a pigmented coat of stain, tannin staining is usually not an issue. 5. The moisture content of interior wood should be low enough to resist microbial growth before applying any coatings, at least 19% or less. Use a moisture meter to make sure this is a fact. If the wood’s moisture content is higher, wait until it lowers to 15% or less, or add a biocide (such as Stay Clean I/E) to your coating before application. Track Page Views With Auctiva’s FREE Counter
